We can build your dream Pantah for you to race or parade.
The price will obviously depend on the specification you choose but could be as little as £11,500 for a machine with a standard road engine and basic specification, up to £15,000 for a machine as specified below and shown in the attached pictures.
Standard specification is typically:
New Cam Belts
Machined Clutch Cover
New Hydraulic Hose
3 Dog Gearbox
New Oil and Filter
New Race Harness
New Battery/ Kill Switch
Elliot Electronic Tacho
Carbon Fibre Clock Bracket
JB Racing Fairing support
36mm Dellorto Carbs (re jetted)
New Bell mouths
P08 Brembo Calipers/new pads
All New brake hoses F/R
JB Racing Modified Frame
36mm Forks, (serviced)
Rear Shocks Hagons (25mm longer)
JB Racing rear sets
JB Racing breather tank(under seat)
Quill 2-1 Stainless steel Exhausts (103 DB)
Complete new Racing body kit
The top specification would typically be:
Forks 38mm Ceriani
Brakes Brembo P8 on the front and P5 under slung on the rear.
Discs EBC front and rear.
Wheels 2.15×18 front and 3.5×18 rear.
Swinging arm standard Ducati
Rear Shocks Koni dial a ride.
Imola Fuel Tank
Fairing Works MHR replica
Seat MHR Replica
New rear sets SRP Engineering
Both front master cylinders are from modern Ducati
Stripped and built
Cylinder heads are 42mm inlets and 37mm exhausts.
Heads stripped and checked.
Cylinder base gasket is 2mm thick.
Pistons are Fast by Ferracci and around 11 to 1 cr
Con Rods are stock Ducati 916.
Carbs are 42mm Dellortos
Clutch is stock Pantah with extra plate.
Gearbox is stock 5 dog design 750.
Vernier cam pulleys are V2 from Australia.
Cams are std.
Belts are std Ducati
Tacho is Elliot white faced.
Full race harness with kill switch (new)
Please feel free to contact us for further information on what is currently available or with your proposed specification for a detailed quotation.